Custom

Granite Creek Enterprises P.O. Box 147 Prather, CA 93651 (559) 298-7889 Custom Work This page is of custom work that I've done. I do work in more than just On30.

	Logging 0-4-0 This was a fun project. I took an On30 0-4-0 Porter and removed everything except the frame, wheels, rods & cylinders. Then I built the replacement body. Because it's not powered, it's put in front of a little Porter or I'll run it with a 4 wheeled "powered" water tank car for example. By adding weight, the brass boiler helped, the side rods move giving the illusion that it's really pulling the train. A layout has a different look & feel when a loco like this is used.
	On30 Porter This loco started life as a 0-4-2. The rear & front pilots were removed. A different stack & front end were installed, along with a crew, wood load, chain & pick. the work is done but it still needs a bell rope, whistle pull, more detail, more weathering...

	1/4" Scale Diorama w/Small Shack, Foot Bridge & Water

	Golf Diorama This is Hole #3 at a local golf course. The fairway, green & sand trap are the same shape as the real one. If you have a favorite golf hole, let me know. It can be done in a variety of sizes & can also include a water hazard. Also suitable for wall mounting.

	This little loco started life as a HO engine. With a different cab, light, bell and a larger engineer it's now a cool little On30 loco.
	On30 18' Work Crew Car A car like this would be used to transport workers to and from the work site. Could be used for logging or mining.
	On30 24' Flat Car with Load Because of the length of the car, and the load on it, I did double queen posts per side and added an extra turnbuckle.
	An On30 18' long flat car (F-4) with a chained loco load. I built the little loco by using an HO mechanism (now it's On30) and it is over 10' long.
	On30 Wine Car with Inebriated Passenger (this is a variation of the Wooden Water Tank Car TC-2) The tool box that's mounted on the side is for wine glass storage inebriated figure extra lettering car can also be made into a beer wagon.
	G Scale -- 4 Wheel Gondola
	G Scale -- Engine MDC Roundhouse Loco with Trackside, Grandt Line, and Ozark Miniatures details
	Gn15 -- Flatcar
	Gn15 -- Gondola
	Gn15 -- Loco I wanted to build a large scale, very narrow gauge, plantation loco. So I used the lower frame from a Ozark mining loco. Than the hood was enlarged by using one from an "S" scale engine and the cab from a MDC Roundhouse Big Hustler. It will turn on a dime so large scale in a small area is very doable.