Granite Creek Enterprises
 
P.O. Box 147     Prather, CA 93651     (559) 298-7889

One of the things that a lot of us run into is we don't have as much room for a layout as we would like.  Then when we add a good size to large building/structure it makes the layout look even smaller.  A good solution is small, no large, structures.  I hope these will help with the problem.

The roofing material on the buildings is from Paper Creek Model Works.

Most orders go out in 2 to 4 weeks.

O Scale Structures and Details

SH-1     Sand House     $60

From a little Porter to a Shay they need dry sand. This is a small Sand House for a small railroad. Just put it on your layout, add sand and you're done.  It's only 3"x4 1/4" in size and comes with a bag of sand.                 

sand2.jpg (513574 bytes)          sand1.jpg (583023 bytes)

S-1     Shack     $70

shacks1a.jpg (97047 bytes)   shacks1b.jpg (90569 bytes)

Foot print size: 2 3/4"x4" (11'x16').
This is a small rustic shack with a shingled roof and a covered area for the "attached" load of fire wood.

S-2     Small Shack     $51 
[This item can be ordered without the roofing material $45]

shacks2.jpg (604066 bytes)

This is a small shack that can be used for storage or a very small dwelling. The sides are very rustic so you can see through it. It has a footprint of just 2"x3".  You have four different tar paper roofing colors to choose from--light gray, green, red or black.  

SS-1     Skid Shack     $45

When a temporary building was needed a Skid Shack was the answer. This one is only 7' wide by 12' long, the skids make it a bit longer than that. Because it's not an "attached" type of structure you can place it, for a while, at different locations on your layout. It also looks good as a load on a flatcar.   

skid1.jpg (596491 bytes)          skid2.jpg (672922 bytes)

SS-2     Office Skid Shack     $54

shackss2.jpg (52404 bytes)

The center of operations must go where the trees are and this office is just what is needed.  It's size of 7' X 8' is ideal for a load on almost any flat car or great for a mini-scene anywhere on a layout.

Details

stump100.jpg (430410 bytes)

A number of years ago an artist (carver) went into the woods and duplicated six different stumps in miniature. They were, at one time, available from “OLD TIME MODELS”. I was fortunate in being able to acquire the masters, molds and the rights to reproduce the stumps. They are cast in Hydrocal and are available painted or unpainted. Because trees (and stumps) come in different sizes they can be used with different scales.

UNPAINTED  GC-S  $7

PAINTED  GC-SP  $14

stumpo.jpg (587704 bytes)

They vary in diameter from 3 1/2' to 6' at the cut

Home   Fn3  On30 Two Truck   On30 4 Wheel   Layouts  OStructures   Custom   Order

01/31/2010